The Brookline Dual antique
cooking range and heating stove is a combination of wood and gas fuels. It featuring two wood heated cooklids,
four gas burners, and a large insulated oven. There is a temperature gauge on the oven door and an
extended hearth below the oven door. A shelf on top of the stove is an ideal
location for storing herbs and spices.
Two stationery nickel trimmed trivets frame the backsplash. The sturdy
and reliable Brookline Dual will add country charm to the kitchen.
Kitchen Cook Stove Installation
Antique Wood-Burning Kitchen Cook Stove:
An antique wood-burning kitchen cook stove must be located a mimimum of 36 inches from unprotected woodwork and other combustible materials or furniture. The addition of a heat shield or other protective devices, to the wall or the stove, allows a reduction of those distances by 50% to a distance of 18 inches from a combustible wall and 9 inches from a noncombustible wall. The wood-burning stove needs to be vented. This is done through a class-A, double-walled chimney.
Antique Cooking Stove with a Gas Conversion?
An antique cooking stove that has been set up with gas does not require any clearance space. The stove is completed insulated and emits no heat. These stoves do not need to be vented. Set ups to Propane (LPG) and Natural Gas available on all models.
Antique Cooking Stove with an Electric Conversion?
An antique cooking stove that has been set up with electric does not require any clearance space. The stove is completed insulated and emits no heat. These stoves do not need to be vented. Set ups include standard 220 Volts, 50 AMPS.
What are the clearance requirements for installation of an antique cooking stove with a gas or electric conversion?
An antique cooking stove that has been set up with gas or electric does not require any clearance space. The stove is completed insulated and emits no heat. These stoves do not need to be vented.
What does a proper wood stove installation look like?
All wood burning stoves and ranges must be placed a minimum of 36 inch from combustible surfaces or 18" from non-combustible surfaces. The addition of a heat shield reduces these distances by one-half. Allow a one-inch clearance between rear wall and protective, non-combustible materials for air circulation. Allow at least 18" between the top of the chimney protector and the ceiling or other combustible material.
