The Napoleon parlor stove is a dependable heater with many lovely design elements. The three foot tall antique stove can heat a room for up to six hours. The entire cast iron body, from top to bottom, features gorgeous scroll work. Four mica windows on the front door will fill the room with a warm amber glow when the fire burns inside. A lovely handcrafted nickel footrest located on an extended hearth is the perfect place to rest feet. Wood is loaded from the side and a cooklid is located on top. The Napoleon parlor stove is a functional heater as well as a beautiful antique.
|
Parlor Stove Menu Overview
|
Archive of Parlor Stoves
This is a library of antique parlor heating stoves that Good Time Stove Company has restored in the past. |
|
 |
Pictures in Settings
This section will show examples of Parlor Stoves being used in actual kitchens. Many of them are stoves we've sold.
|
|
|
Happy Customers
Here, you'll find pictures of folks who found themselves the perfect stove in our showroom.
|
 |
|
 |
Facets and Features
The Modern Crawford Parlor Stove seen here represents the typical antique parlor stove. Most parlor stoves are equipped with the facets and features diagrammed below.
|
|
|
Watch Video Click here
Parlor excerpts from our informational video.
|
|
 |
Triple Effect
Explore some of the hidden technology in the Parlor Stove.
|
|
|
|
 |
Inventory
After you've educated yourself with the previous sections, you'd click here to see our Parlor Stove inventory. But don't forget, there are plenty of other types of stoves. Each of these helpful sections also exist for several other heaters and kitchen ranges. Enjoy.
|
|
Heating Stove Installation
Antique Wood-Burning Heating Stove:
Installation guidelines desrcibed on this page have been provided by the National Fire Protection Association. The NFPA standards are the basis for many local codes. These guidelines state that a wood-burning stove, heating stove must be located a mimimum of 36 inches from unprotected woodwork and other combustible materials or furniture. The addition of a heat shield or other protective devices, to the wall or the stove, allows a reduction of those distances by 50% to a distance of 18 inches from a combustible wall and 9 inches from a noncombustible wall. The wood-burning stove needs to be vented. This is done through a class-A, double-walled chimney.
Antique Heating Stove with a Gas Conversion:
An antique heating stove with a gas conversion must conform to the clearances for a wood-burning stove (above), maintaining a minimum distances of 9 inches from a non-combustible wall when a heat shield is in place. The converted heating stove needs to be vented. This is done through a class-B, single-walled chimney. Set ups to Propane (LPG) and Natural Gas available on all models. With a gas conversion the total BTU ranges from 28,000 to 45,000.
Antique Heating Stove with an Electric Conversion?
An antique heating stove with an electric conversion must conform to the clearances for a wood-burning stove (above), maintaining a minimum distances of 9 inches from a non-combustible wall when a heat shield is in place. The eletcric converted heating stove does NOT need to be vented. With a gas conversion the maximum BTU output is 38,000.
What does a proper stove installation look like?
All heating stoves must be placed a minimum of 36 inch from combustible surfaces or 18" from non-combustible surfaces. The addition of a heat shield reduces these distances by one-half. Allow a one-inch clearance between rear wall and protective, non-combustible materials for air circulation. Allow at least 18" between the top of the chimney protector and the ceiling or other combustible material.
